Conflicting alert messages – Enphase Enlighten Review

This morning I reported an alert that connection to the Envoy was interrupted. I called WindMar and they said is typical since in their all was fine. I told them that all panels (30 of them) their was no information in them providing production and previously their was one pane in kwh and only one providing it a Wh. In addition we were producing 6.9 and utilizing 2.2. Suddenly with the same amount of sun it was reporting from one moment to the next production of 0.5 kwh the home from 2.2 changed to the same amount of production of 0.5 whereas the steady consumption was 2.2 kwh. At one point we decide to turn a 18,000 A/C unit and both production and consumption remained as if nothing had ever happened. Again call WindMar and they told me these occurrences are normal. I know is not Enphase is lacking the right technology, the installation is flawed or the folks have no clue of how it should work. I know these report are faulty hence you cannot have a proper calculation of real output and when battery power will go into effect, or the input of the panel production is also crazy with full sun reporting from 6.6 to 1.4 to one minute to the next and sunshine everywhere. Hope you can get something out of this but something is not right. Had the system for about three weeks only. Thank you.
Review by casapalmareal on Enphase Enlighten.