Pure Synth® Platinum

Pure Synth® Platinum is a full-blown rompler/synthesizer for your iOS device. Neither the synth engine or the sample engine is an afterthought: Both engines are fully capable and feature-rich. The romper section contains a well rounded assortment of analog, synth, string, digital, and acoustic instruments. The beauty of Pure Synth® is the ability to mix between the two worlds of analog and sample based instruments. From rich and warm pianos, to lush strings and articulated woodwind sounds, your thirst for real world instruments will be quenched. This is probably one of the most extensive, feature-rich, and preset laden plugins you can get for iOS device. PS: We also have an affinity for 80’s and 90’s digital synths, so look for your favorite old school sounds in there as well.

Category	Price	Seller	Device
Productivity	Free	MIDIculous LLC	iPhone, iPad, iPod

FREE IAP Schema

When you first purchase, you will have access to all of the analog oscillators. You can use as-is without loading your device with the 6GB sample content, but there will be no presets. Go to the Settings——>IAP section and you will be able to download two sets of IAP

1. Factory Preset Samples - Contains 3.23GB of the samples needed for the presets.
2. Factory Samples Additional Content - Contains 2.7GB of the remaining sample content that is not used in any of the presets

Please don't be alarmed at using all of your device's space. With our new update, you are able to store samples on external SSD and even thumb drives.

BRAND NEW UPDATED FEATURES:

▪ External Drive for Sample Storage
▪ BlueTooth MiDI Capable
▪ iCloud Backup and Sharing of Presets
▪ Enhanced AUv3 Preset Resizing
▪ Expansion Pack Banners and Branding
▪ Metal support, Faster UI, Faster loading, and major CPU Updates
▪ Two Mode MIDI Program Change

Highlights:

▪ 650 Presets
▪ 1,000 Sounds including acoustic
▪ 21619 Samples
▪ 6.0GB Sample Size
▪ 108 custom wavetables recreated from analog sources
▪ Warm Table™ technology for analog rich sounding wavetables
▪ PWM for Analog Oscillators
▪ JP-Like Detuning with variable blend modes
▪ Tap+Hold to Assign Modulation to a parameter
▪ 20 High Quality Digital Effects, including the FULL VKFX Suite from Overloud™
▪ Series and Parallel Effects Routing Options

iOS Features:

▪ iOS 11+
▪ AUv3 Full View Support
▪ Supports Scrolling to see all parameters
▪ IAA
▪ Background Audio
▪ Virtual MIDI
▪ Separate MIDI Channel Selections
▪ Full 2732 x 2048 HD View
▪ Virtual Keyboard Sends MIDI
▪ MIDI Learn any parameter
▪ File Sharing of Presets

Features

▪ Flexible Preset System with Fast search, loading, and saving
▪ Favorites option for sounds and presets
▪ Lightening fast sample streaming engine
▪ Warm analog rich simple-set ran through analog gear
▪ Warm Wavetable Technology
▪ Easy modulation system - Tap+Hold to assign modulation to virtually any source
▪ A VA circuit modeled State Variable Filter
▪ Ability to select edit multiple oscillators
▪ JP-8000 Supersaw Unison/Detune
▪ Powered Scale Option - Scales the detuning in a unique way.
▪ Brand New FX System
▪ Dynamically and Graphically position FX signal flow in virtual racks.
▪ Separate Oscillator FX sends for Reverb and Insert FX.
▪ Featuring Overloud's VKFX Suite.
▪ New Dattorro's figure-of-eight Algorithmic Reverb.
▪ New Schroeder Algorithmic Reverb.
▪ New Soft Master Limiter with Tube Saturation.
▪ New Stereo Spread/Widener with Safe Bass Multi-Mode Settings.

----------------
> 2GHz ARM Processor Recommended - iPad Pro 12.9 and 9.7 in, iPad 5th Gen, iPad Pro 12.9 in. (Gen 2), iPad Pro 10.5 in., iPad 6th Gen, iPad Pro 11 in., iPad Pro 12.9 in. (Gen 3), iPad Air (Gen 3)
> iPhone 6s and higher - iPhones with at least 2GB RAM Supported Only
----------------

Terms and Privacy Notices:

• EULA Terms of use - https://gospelmusicians.com/EULA.html
• Privacy Policy - https://gospelmusicians.com/privacy-policy.html
• Terms and Conditions - https://gospelmusicians.com/terms-conditions.html

Reviews

scam app
KevinBRevvin

This is one of the worst scam apps I’ve ever seen. Downloaded it and opened it and every preset sound shows a red box that says “samples missing” and nothing actually plays or functions in any way.

Latest update broken?
eesobi

Can’t download any IAP. Nothing in UX to click for downloads it appears.

I couldn’t open the app
123DADE4GH

There is a lot of Samplers missing actually I just get a few sounds. I just want my money back. SAD

A great addition for the iPad
B-dub1111

This is what was missing for the iPad. So many great acoustic sounds now available and it’s AUV3. This company has been putting out amazing products, everything is solid, and useful. The sounds are fantastic and the control of being able to dial-in the exact frequency to the .01 Hz of modulation is sick, that’s with every app. These apps from this company now find their way into every project I create. I couldn’t be happier.

It won’t run without WiFi
albalb8989

Won’t run without WiFi

Here it is again. Apple keeps removing it.
Eriptron

Update: This synth app has ‘a lot’ but, for my experience, Pure Synth Platinum has no personality. It technically can do a lot. I just don’t find any of it exciting or stimulating. While, say, Poison-202 can’t do nearly as much but it has a personality and is fun to use. Both this synth app and their BASSalicious 2 I just don’t use so I’m deleting both freeing up something like 9 GBs of memory. PS-also tired of the useless in app keyboard and note hold features and thus developer’s obtuseness in fixing them, so good-bye. —- (1st generation iPad Pro on iOS 12.3.1) Pure Synth Platinum 2 keyboard is all but useless. There isn’t an octave adjustment and I gather the little square with the zero inside would, if it was completed, show the selected octave. No note latching. No mod control. No pitch control. No key size adjustment. As an AUv3, the full screen size requires sliding the app up and down to see everything and since synth screens are usually filled pretty full, making finding a ‘safe’ touch location challenging to find. Keyboard should be able to be slid up and down to uncover controls it’s on top of. It makes more sense to use a long touch to open a control’s Menu and a double-touch to set the control to zero or a normal starting value Installing the 4 extra packs were problematical. The first time the download didn’t want to start and the App crashed. Deleted and reloaded App. Tried downloading the first pack again. App crashed again. Cancel download wasn’t working. Removed app. Without the app installed. The first download pack started downloading. Loaded PSP2 again. This time I could cancel the download though. Waited about 5-6 minutes until it finally did cancel. Cycled power twice on my device. Reinstalled app and successfully installed all four packs without incident. Took not quite 5.9GB. Several tabs under the Settings screen are now gone, one being Audio? The virtual keyboards are a problem. The built in one, the App screen will scroll completely above it but only from where the App’s virtual keyboard sits though. We need to be able to move the keyboard up or down like iVCS3 can. That doesn’t work with AUM’s virtual keyboard. You can’t scroll up high enough to to access the bottom of the Control screen. With jockeying the windows location and size, I was able to get the AUM keyboard and PSP2 to play nicely together and scroll up to access the very bottom of the App’s screen. The downside of using the full screen AUv3 and scrolling around the UI, is that you frequently can’t make simultaneous adjustments when one control is off screen. The biggest downside that I see with Pure Synth Platinum 2 is that it doesn’t seem to have a personality. It seems like just a bunch of things that were thrown together. Nothing actually matched together for an overall unique experience (eg Poison 202, Spacecraft, WaveSHAPER Pro, OuttBass, LayR, Magellan to name a few). PSP is inconsistent when using AUM’s virtual keyboard with it’s key latching capability. With samples, changing to another one, the latched note/s are released, making checking samples extremely laborious. Adjusting various settings in PSP2 caused AUM’s latched key/s to be released. What are the unlabeled controls Under Attack and Decay sliders? Inconsistent labeling under Amp and Filt; Decay/Dec and Sustain/SusI if you can fit the label Control, you could fit Filter instead of Filt. Inconsistencies are symptomatic of poor company/dept organization. That all said, the prefab sounds sound wonderful. And setting a control to zero (or any value) is waaaay easier in PSP2 than 98% of the other synth app’s. I’ve never seen a synth with a ‘pitch’ wheel module and a mod wheel module before but it still makes sense to put those two wheels on the keyboard for ease of access. Then to have the pitch wheel in the bottom left and the Mod wheel in the upper right?? That just doesn’t make a lot of sense. The other aspects that could stand improving would be to add non-standard wave forms for the LFO. With 4 Oscillators, 4 Amp envelopes, 4 Filter envelopes and 4 Control sections with separate pitch controls YET PSP2 only has 1 LFO?! Why hamstring it? Why not 4? Here’s the rating killer. NO MANUAL OR DOCUMENTATION NOR IN APP HELP! And videos are not documentation. (You can’t search videos for answers like you can a PDF for one.)

Great Sounds But Very Unstable
MeloMcFLY

**Update** Less than 10 hours after I posted this review, the developer released an update that seems to have fixed almost all of what I mentioned below. Not sure if it was in direct response, but thanks for the fix & quick turnaround. Updating to a four star review & purchasing Bassalicious 2. *Old review below* I’ll start by saying that I love the sounds in this plugin, however, it doesn’t do me much good because of the bugs and stability issues. Prior to this most recent update, Pure Synth would work intermittently in BeatMaker 3. On a good day, I could open a project with 2 or 3 instances of Pure Synth and it’d play with no issues, but more often than not the plugin would crash and I’d have to close/open the project until it decided to cooperate. This most recent update seems to have lessened the amount of crashes, however, there are now two issues: either no sound output from one or more instances of Pure Synth when multiple instances are in one project (synth UI shows the keys are being ‘pressed’, but no sound is coming out), or if the sound does play from an instance, the output is EXTREMELY low (around -33db when volume fader set to 0). Please fix this. I’d love to pickup Bassalicious 2, but no way I can do it in good conscious with the issues I’ve experience with PSP. Running this on an 2017 iPad Pro with 512GB storage.

??
Pancho Villa80s

Why it takes too much time to download the update ? Wifi...??

Go to app but,
Marv1977

I really love the plugin but the I have is it shows I downloaded everything but still missing some samples ??‍♂️

It’s great but...
JaLoSeGo

I love all the different sounds and it’s possibility to be a great module for my keyboard, but for some reason the downloaded additional sounds don’t show up in my list, I’ve tried everything but it doesn’t seem to work.