Jetting for KTM 2T Dirt Bikes
| Category | Price | Seller | Device |
|---|---|---|---|
| Sports | $3.99 | Ingenieria del Software ISEnet S.L. | iPhone, iPad, iPod |
In order to get the weather values, the application can use the location service (GPS or WiFi) to obtain the position and altitude, and the network connection to get the temperature, pressure and humidity from the nearest weather station. Nevertheless, the application can run without GPS, WiFi and internet connection, in this case, the user has to give the weather data.
The application is made up of four tabs that are described next:
- Results: in this tab, the recommended main jet, needle type and clip position, pilot jet and air screw position are shown (screw position is expressed in turns from fully tightened). These data are calculated depending on the weather conditions and the engine configuration introduced in the next tabs. Under the recommended main jet, the calculated real value with decimals is shown. The air density and density altitude are shown too. In addition, this tab lets do a fine tuning adjustment to adapt to a concrete engine (you know that each engine has its own personality).
- Weather: you can set the values for current temperature, pressure, altitude and humidity. The values of this screen can be manually set or can be loaded by the application reading the data from the nearest weather station (from the GPS tab).
- Engine: you can set in this screen the information about the engine, that is, the model year, model and carburetor, and the oil mix ratio that you\'re using.
- GPS: This tab allows to use the location service (using GPS or WiFi) to get the current position and altitude, and connect to an external service to get the weather conditions of the nearest weather station (temperature, pressure and humidity).
The app let you use different measure units: ºC y ºF for temperatures, meter and feet for altitude, and mb, hPa, mmHg, inHg y atm for pressures.
Valid for the following models from 2005 to 2018:
- 65 SX (2010 to 2018)
- 85 SX
- 105 SX
- 125 SX
- 125 SXS
- 125 EXC
- 144 SX
- 150 SX
- 150 XC
- 200 EXC
- 200 XC
- 250 SX
- 250 SXS
- 250 XC
- 250 EXC
- 300 EXC
- 300 XC
- 300 MXC
Reviews
Does not work!
Andrkopoulii
I'll be asking for a refund. This app is buggy and does not work as advertised.
Would be great but doesnt include my model...
Nerdvous
If you could add the Freeride 250R, this app would be used a lot in my workshop. Please add the Freeride, thatd be great!
It's convient
Mxgrandp
It is exactly what's in the owners manual section on jetting but you don't have to look it up. I race @ 200ft & 4500ft so it's handy. Not all portions work like they should but it'll get u where u need to be.
Great App
Aragu3666
Easy to use. They didn't have my bike in database . Told them and in 1 week they emailed me to tell me it was in there.?
Awesome App!! Great for getting you really close!
56dad
Great App and easy to use. Kid said bike never ran better! Only complaint is clip position does not indicate from top or from bottom....
Save your $4
MryDesi
You'll need a bucket to collect all the drool from the pipe if you use these settings. Dont be a sucker like me.
Moderately useful at best
Falconys
Some bike models are missing, and there's no way to tell the app what you already have for carb set up so its suggestions are not particularly applicable.
